Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Parker Restoration (https://parkerguns.org/forums/forumdisplay.php?f=8)
-   -   VH grade trigger finish (https://parkerguns.org/forums/showthread.php?t=22782)

David Penland 11-24-2017 08:20 PM

VH grade trigger finish
 
How where the triggers and trigger guards finished on VH grades when they left the factory? Thanks for any help.

Jerry Harlow 11-24-2017 08:33 PM

Nitre (Niter) blued.

https://en.wikipedia.org/wiki/Bluing_(steel)

Brian Dudley 11-24-2017 09:10 PM

All grades were Nitre blued.

Dean Romig 11-24-2017 09:16 PM

Not all triggers were nitre blued

VH triggers and trigger guards were nitre blued.

DH and higher triggers were nickel plated except AAH and higher were normally gold plated.





.

Brian Dudley 11-24-2017 09:27 PM

Forgive me Dave. I read too quickly and thought you were asking about trigger Guards.

What Dean said is correct about triggers. Grades below D were blued.

Dave Noreen 11-25-2017 09:12 PM

That can't be right!! Bachelders finished the triggers on my 1930 vintage 20-gauge VH-Grade bright. :shock:

Gary Bodrato 12-05-2017 10:19 PM

DAVID, I asked this same question. there are several pages with great photos from several members, posted on Oct. 5 2017 in the general forum, it was a great help

Breck Gorman 12-07-2017 12:11 AM

I read in Parker Story that triggers were fire blued.

Bill Paul 03-25-2018 02:48 PM

Does Niter bluing take differently on different metals? The piece I saw was much "brighter". It was not on a Parker, but Definitely NOT what I have seen here. I would like to have my trigger guard done as close to original as practical, but don't want to have to strip and re-polish it either. Is all niter bluing the same?

Jerry Harlow 03-25-2018 03:33 PM

Quote:

Originally Posted by Bill Paul (Post 239079)
Does Niter bluing take differently on different metals? The piece I saw was much "brighter". It was not on a Parker, but Definitely NOT what I have seen here. I would like to have my trigger guard done as close to original as practical, but don't want to have to strip and re-polish it either. Is all niter bluing the same?

Bright blue probably meant it was hot blued. Duller bluing probably shows that it was rust blued like barrels. Nitre Bluing equals a tougher process to get right. You are correct as each piece of steel will respond differently and for every ten degree difference in the temperature of the nitre bluing, one gets a different color, from purples to straw colored to black to the perfect blue, and also depending upon how long it is left in the salts. And we are dealing with a solution at about 600 degrees. So if someone tells you they want $75 or more to do your triggers and trigger guard in nitre blue, be happy. It is not as easy as one thinks. Don't ask how I know. :banghead:
https://www.brownells.com/userdocs/l...ing_Bluing.pdf

Degrees Fahrenheit
Color Of Steel
430
Very pale yellow
440
Light yellow
450
Pale straw-yellow
460
Straw-yellow
470
Deep straw-yellow
480
Dark yellow
490
Yellow-brown
500
Brown-yellow
510
Spotted red-brown
520
Brown-purple
530
Light purple
540
Full purple
550
Dark purple
560
Full blue
570
Dark blue
640
Light blue


All times are GMT -4. The time now is 02:18 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Parkerguns.org