Parker Gun Collectors Association Forums

Page 1 of 2

Show 40 post(s) from this thread on one page

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- Parker Hammer Guns (https://parkerguns.org/forums/forumdisplay.php?f=14)

- - Parker 10 gauge (https://parkerguns.org/forums/showthread.php?t=40518)

Toby Espy

11-21-2023 06:03 PM

Parker 10 gauge

4 Attachment(s)

Not sure what frame this is Thanks for any help

Bill Murphy

11-22-2023 09:34 AM

Do I see a very faint "2" in the rear lug?

Toby Espy

11-22-2023 09:40 AM

I can’t see it but I’m about blind

Toby Espy

11-22-2023 09:47 AM

2 Attachment(s)

I can’t see it but I’m about blind but that’s on right barrel

Randy G Roberts

11-22-2023 10:02 AM

What is the distance center to center between the firing pins? Not certain by looking at your pics.

1 3/16 = 3 frame
1 4/16 = 4 frame
1 5/16 = 5 frame

Toby Espy

11-22-2023 10:08 AM

2 Attachment(s)

Looks like 1 1/8 but closer to 1 3/16

Randy G Roberts

11-22-2023 10:16 AM

1 Attachment(s)

1 1/8 = 2 frame. You can also cross reference with the attached if you are uncertain.

Toby Espy

11-22-2023 10:19 AM

Than you very much

Arthur Shaffer

11-22-2023 10:55 AM

I have a higher grade 10 that is about 1500 numbers before that which is a 2 frame. It likely is a 2.

Brian Dudley

11-22-2023 02:31 PM

Given how early the gun is. It likely pre-dates the standard frame sizing system. And certainly the marking of such system. But it would be roughly equivalent to a 2 frame gun.

All times are GMT -4. The time now is 01:02 PM.

Page 1 of 2

Show 40 post(s) from this thread on one page