Looking for an approximate value
 

Any ideas on value? Looks like 1901model - 58,000 made - TY!!

28 inch barrel.

It looks pretty decent but without barrel wall thicknesses, bore and choke measurements, barrel length and serial number to find original configuration and barrel length it would be hard to put a high end figure on it.





.

TY - will look for that data.

It is a Grade 2 or a GH and your serial number 107882 is not in the serialization book Looks to be a honest gun

Yes - s/n is 107882. It is stamped many times on a the gun. How/where can I get the barrel wall thickness?

Yes - s/n is 107882. It is stamped many times on a the gun. How/where can I get the barrel wall thickness and the other data mentioned?

The barrel wall thickness has to be measured by a person with a gauge made to do so . Could you post a picture of the top end of rib in front of the bead , will narrow one guess down of the correct barrel length . What is the length of the barrels ?

You could order a research letter on your gun its cheaper if you become a PGCA member the letter will give you info on grade barrel length and who may have ordered it . Go to the Home page and click on research letters for details. The letter will not give you the barrel wall thickness. That has to be checked as stated before

Rib matting is correct looks to be original where you located maybe some one closeto you could measure the Bwt and help you out one the value ,

28 inch barrel - added pics requested.