SBT forearm disassembly
 

Recently purchased a shooter SBT which has a replacement stock on it. Would like to refinish both the stock and forearm but am unsure of the forearm disassembly. Would appreciate any assistance on this subject.

Just to remove the wood:

Remove draw bolt.
Remove two small rear screws.
Remove two latch screws.

Forend iron will pull out of wood. And latch will tap out.

SBT forearm dissembly
 

Thank you for the information. I assume that the draw bolt you refer to is the bolt that is the front of the forearm. That is what I'm not familiar with. Understand the rest.

Yes.