Sporting Classics article
There’s an article on shooting, hunting with and evaluating Damascus-barreled shotguns in the Sept/Oct issue of Sporting Classics that might raise eyebrows amongst modern day gents who are vague on them. Shawn Wayment and Lars Jacob are mentioned as proponents, as is the author Tom Keer. Curiously the words “low-compression shells” are used several times and while we all know what that means it’s the first time I read/heard that specific term. Also it’s the first such article I’ve seen in a regular sporting mag.
frank |
I'd like to read it but I don't subscribe to Sporting Classics.
. |
Newly written content of the mag is of course copyrighted. I’ve subscribed for many years but I’m pretty sure SC is sold over the counter at the larger book places. SC is the only sporting mag I can think of offhand that does a booth at the Southern SxS.
|
I recently received my renewal notice and probably need to re-up.
|
They had a great article about Doug Turnbull restoring a DH in a recent issue.
|
its generally available at magazine rack such as Barnes and Nobles
|
Sporting Classics also offers a "Sporting Classics Daily" email that generally has excerpted articles and other features. It's free for the sign-up. I would venture that the article(s) in question will appear eventually.
|
When the magazine first started up in the late 1980's, I took advantage of their promo offer of $150 for a lifetime subscription, plus a Lynn Bouge Hunt print. So far then I am into it for less than $5/yr. I always stop at their booth at the Southern and remind them that I am one of those lifetime prescribers and will probably outlive the magazine.
Dean, I'll save my copy for you. |
Finally picked up the Sept/Oct Sporting Classics
Steve Culver is in Meriden, KANSAS www.culverart.com The cover by J.F. Kernan is one of my favorites http://pic20.picturetrail.com:80/VOL.../406685935.jpg |
I don't have a place carrying the publication here, and it's not online. Any suggestions for acquiring a copy of this article?
|
Sporting Classics Daily re-published that Damascus article by Tom Keer. It’s well worth signing up for and it’s free so I don’t think they’d mind if I shared it.
https://sportingclassicsdaily.com/da...safe-to-shoot/ |
What is a “low compression “ shell?
I have seen the phrase “low pressure” shell ( cartridge) but writers leave the definition to the reader without stating a number or justifying the number. Or sometimes state a pressure number from 2 1/2” British cartridges and thin walled British guns for stouter Parker guns. |
I have read multiple times that the manufacturing of Damascus bbls ceased for the most part due to the costs involved in production. Between the raw materials and the labor involved fluid steel bbls were much more economical therefore the preferred bbl type.
As long as the bbls are sound and the wall thickness good, no reason we can't/won't/don't shoot modern 2 3/4" shells in the 2 5/8" chambers. Plenty of info/research out there regarding using 2 3/4" shells in 2 1/2" and 2 5/8" chambers. Don't use snotty game loads or "Super Crusher" speed shells and you'll be fine. Personally, I shoot factory RST, factory Fiocchi, factory Clever and reloaded RST shells. Clays break and game birds go in the bag. |
The article, like most written since the 30s is more "somebody said", and we now KNOW what the gun makers said regarding Smokeless Powder in pattern welded barrels, we KNOW the "rough forged tubes" were proved in Belgium and the finished barrels were proved by the U.S. gun maker, we KNOW what loads were recommended by the gun makers, and we KNOW the pressures of those loads. And I have no idea where the "keep the pressures below 8000 psi" came from.
This is what Parker Bros. said in 1902: "All are bored for Nitro or Black powder" http://pic20.picturetrail.com:80/VOL.../411815688.jpg and what Parker said regarding proving the finished gun; courtesy of Jeff Kuss http://pic20.picturetrail.com:80/VOL.../412230864.jpg Period publication documented c. 1895 to pre-1920s Smokeless Powder load pressures: 12g 1 1/8 oz. 3 Dram Equivalent of BULK Smokeless was 6000 - 8000 psi. 1 1/8 oz. 3 Dr. Eq. of DENSE Smokeless was 8,500 - 10,000 psi. 1 1/8 oz. 3 1/4 Dr. Eq. BULK Smokeless was about 8500 psi. 1 1/8 oz. 3 1/4 Dr. Eq. DENSE Smokeless was 9500 - 10,500 psi. 1 1/4 oz. 3 1/2 Dr. Eq. BULK Smokeless was about 11,500 psi 1 1/4 oz. 3 1/2 Dr. Eq. DENSE Smokeless was 12,500 psi 16g 1 oz. 2 1/2 Dr. Eq. BULK Smokeless (1165 fps) was about 7000 psi; 2 3/4 Dr. Eq. (1220 fps) about 8500 psi. 20g reported pressures varied significantly 7/8 oz. 2 1/2 Dr. Eq. BULK Smokeless was 8000-10,000 psi. 7/8 oz. 2 1/2 Dr. Eq. DENSE Smokeless was 11,000 - 12,000 psi. This of course has nothing to do with the effect of recoil on maybe 120 year old wood. And bad things happen to barrels in 120 years so it would be irresponsible to do nothing to evaluate the integrity of pattern welded OR fluid steel barrels. |
I agree with your comment about the effect of recoil on wood. That is the main concern I have with shooting these great guns. THX Drew!
|
Amen Drew!
|
Another point worth repeating.
John Brindle, The Double Gun Journal, “Black Powder & Smokeless, Damascus & Steel”; Volume 5, Issue 3, 1994, “Some Modern Fallacies Part 5”: "The pressures produced in the breechloader by black powder, as black powder was actually loaded at the end of the 19th century, were not significantly lower than those given by smokeless (then often termed “semi-smokeless”) powders developed as a substitute for, and an improvement on, black powder." From a 1895 study published in The Field for 1 1/8 oz. 3 Dr. Eq. @ 1222 fps, converted to psi with Burrard's formula 72 gr. Curtis & Harvey's No. 2 T.S. (somewhat similar to FFFg) = 3.2 Tons = 9,632 psi 82 Gr C&H No. 4 T.S. (similar to FFg) = 2.26 Tons = 6,474 psi 84 gr. C&H No. 6 T.S. (similar to Fg) = 2.1 Tons = 5,936 psi |
[QUOTE=Mike Koneski;284525]I have read multiple times that the manufacturing of Damascus bbls ceased for the most part due to the costs involved in production. Between the raw materials and the labor involved fluid steel bbls were much more economical therefore the preferred bbl type.
Another contributing factor was World War 1. Liege, Belgium was arguably the hub of Damascus barrel manufacturing. The Germans overran Belgium and occupied Liege in August 1914. It would be four years before they left and five years before the Treaty of Versailles formally ended the war. Damascus barrel manufacturing production was never the same again. |
Correct
|
Quote:
|
My favorite Kernan Gerald; "A Man's Best Friend"
http://pic20.picturetrail.com:80/VOL.../338162344.jpg |
That is a good one also.
|
I have subscribed to the SC daily email for a couple years and really enjoy it. One of my favorite newer authors is Roger Pinckney, who lives on the S. Carolina coast, and writes for SC a great deal.
SRH |
All times are GMT -4. The time now is 12:43 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org