Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Shotgun Shell Reloading (https://parkerguns.org/forums/forumdisplay.php?f=21)
-   -   Blue dot (https://parkerguns.org/forums/showthread.php?t=33922)

Aaron Beck 08-05-2021 06:13 AM

Blue dot
 
Ive combed this forum and had a quick look at the 16 ga site but the answer hasnt jumped out at me. Does anyone have a recipe for a low pressure 16 ga load which uses blue dot powder? Perhaps blue dot is unsuitable, its listed as a magnum powder but I happen to have a lot of it which came from a family member's estate. hoping to build some bismuth loads.
7/8 oz 1150 or so would be ideal.
Thanks

Harold Lee Pickens 08-05-2021 07:05 AM

I'll take a look at my files that I downloaded from the Yahoo 16 ga site--now defunct, but I always thought Blue Dot was used in heavy 1 1/8 oz 16 ga loads.

Aaron Beck 08-05-2021 07:08 AM

ok that would be helpful, thanks.

Harold Lee Pickens 08-05-2021 07:14 AM

Cant find any in the Low Pressure load files using BD, I have other files but need to know what hull you are using and also what wad would help--but these are all for lead shot--I do have some loads using Nice shot and Green Dot in LP 7/8 oz loads.

Harold Lee Pickens 08-05-2021 05:41 PM

I misspoke. Thought I had a 7/8 oz load of non-tox Nice Shot with Green Dot, but it uses 7625, which I have but may be hard to find, here it is:

Tom Armburst Load Test Results:
Federal 16 ga hulls, plastic, cut to 2 1/2"--I have a bunch if you dont
7625 19 grains
SG 16 wad
7/8 oz Nice shot #6
6 fold crimp
1107 fps and 7280 psi

I'll keep looking, and thanks for the pm.

Bill Murphy 08-05-2021 05:47 PM

Blue Dot is a very slow powder and may/will not generate sufficient pressure in a 16 gauge 7/8 ounce load at 1150 fps. The result may be off sound and inconsistent ignition. I would not try it until I found a recommended load in a manual.

Harold Lee Pickens 08-05-2021 10:09 PM

1 Attachment(s)
Hope the pic turns out. Here are some 16 ga bismuth loads. Most much hotter than what you are looking for.
What are you shooting them thru?

Harold Lee Pickens 08-05-2021 10:23 PM

1 Attachment(s)
Couple more, also found some 7/8 oz loads with steel shot, but much higher pressures.

Victor Wasylyna 08-05-2021 10:38 PM

Blue Dot is a “magnum” powder. For 16 gauge, it loads 1 1/8 oz loads at high velocity (1250+ fps). It will not provide what you seek. Sell what you have and buy some good powder. (I don’t even like Blue Dot for magnum loads.)

-Victor

Bill Murphy 08-06-2021 02:54 AM

Years ago, I used a small quantity of Blue Dot for heavy lead waterfowl loads and it worked fine. However, we don't do that any more. I agree with the last poster. Sell your powder.


All times are GMT -4. The time now is 11:36 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org