Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   New User Introductions (https://parkerguns.org/forums/forumdisplay.php?f=6)
-   -   longer barrels wanted (https://parkerguns.org/forums/showthread.php?t=24176)

Mike Hoecherl 05-06-2018 10:38 PM

longer barrels wanted
 
i have a gh grade # 1 frame it has 2 sets of barrels 1 damascus and 1 vulcan steel both barrels 26 inch i’m looking for 30 or 32 inch barrels that will fit a #1 frame to buy or to trade both barrel sets are chocked ic and ic i’m thinking maybe the barrels may have been cut down what say u and how do i search for longer barrels

new member mike hoecherl

Mills Morrison 05-07-2018 08:48 AM

Welcome Mike! You should have luck in our members only section. Enjoy your time here

Mike Franzen 05-09-2018 02:28 AM

Welcome to the PGCA. If you want to know if your barrels were cut, post the serial numbers of the frame and the barrels. If they are in The Book someone can tell you how they left the factory.

Mike Hoecherl 05-10-2018 11:50 PM

gun info
 
serial number 77807 on frame and on 30 inch Damascus barrels. no serial number that I could see on the Vulcan steel 26 inch barrels. got length of damascus barrels wrong not had them out in a while

Mike Poindexter 05-11-2018 04:23 PM

there is a pair of 30 inch 1fr bbls listed on e-bay now, item no. 382459067200. they have been significantly honed, so would be careful of wall thickness.

Mike Hoecherl 05-11-2018 04:59 PM

longer barrels
 
thanks mike!


All times are GMT -4. The time now is 08:42 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Parkerguns.org