SMOKELESS 12 gauge 2 1/2" low pressure

[CraigThompson]

Need some ideas on powder and charge weight to use for low pressure 12 gauge 2 1/2" shells . With 1 ounce of shot .

Hulls used ,

Remington Premier trimmed

Wad's used ,

Clay Buster 1100
Clay Buster 0178

Primers used ,

CCI209
WIN209

So then all I need is some ides on powder and charge weights to stay in the under 7,000 range .

[Dave Miles]

http://data.hodgdon.com/main_menu.asp

[CraigThompson]

I asked for data for 2 1/2" . All they show is 2 3/4" . I am sure something has to change when one cuts a 1/4" off the shell .

And on top of that I already have data for 2 3/4" shells from Hogdon , IMR , Winchester and Alliant .

I stand corrected there is a single load for 12 gauge 2 1/2" .

After I checked that one I then looked closer for the same thing in 16 and 20 . And as I said they DO NOT show any .

[Frank Cronin]

2 1/2 is there. Check again.


Shell: 2 1/2" REMINGTON PREMIER OR NITRO 27 OR STS PLASTIC SHELLS
Load Type Gauge Shot Wt. Powder Primer Wad Powder Wt. (Gr.) Pressure Vel. (ft/s)
Lead Shot 12 1 oz. Universal Win. 209 WAA12R 20.8 7,300 PSI 1180