help with e grade

[Thomas L. Benson Sr.]

Would like info on number of E grade parkers . This one is ser. 69332 and has a 2 above ser no. It is a 12 gauge. thanks Thomas L. Benson Sr.

[George Blair]

Thomas an E grade would be a 10Ga. The 2 would indicate grade. The same gun in any other guage would be a G grade, or a 2 grade.

[Thomas L. Benson Sr.]

Gun is now a 12. Do you think the barrels have been changed. I purchased it at a fish and game auction about 3 years ago and sent it to my son in minnesota 2 years ago. I will have him take some pictures and post them. Thanks Thomas L. Benson Sr.

[George Blair]

Does the serial # on the barrels and the forearm match the reciever? If they do it could have been part of a two barrel set, or sent back later to be rebarreled. I would be sending for a letter if the #'s match.

[Dean Romig]

Thomas, is it a hammer gun or hammerless?

[Dave Suponski]

If there is an "E" on the water table it would be a hammerless gun.

[Dave Noreen]

My 1889-vintage hammerless quality 2 is also stamped E on the watertable, but it is a heavy 2-frame 12-gauge, and letters as such.

[Dave Suponski]

Dave,

Thats very interesting...An E grade 12gauge! Well I guess the old expression"Never Say Never" applies here :)

[George Blair]

Well that shows how much I know..I was sure all E grade and N grades were 10 Ga..

[Destry L. Hoffard]

George,

Don't feel bad, I thought the same thing.

DLH

[Dean Romig]

Well that shows how much I know..I was sure all E grade and N grades were 10 Ga..

That is what we have been told by the authors of TPS.

Once again, this just goes to reinforce "Never say never".

[Dave Suponski]

I would really like to see the stock and order book entries for Dave's gun.

[Dave Noreen]

I think in theory they were, but what happens on the factory floor with workers getting product out the door and "in theory" are two very different things. A Quality 2, number 2-frame could certainly end up with either a set of 12-gauge or a set of lighter 10-gauge barrels, so whether stamped E or G probably wasn't of great concern to workers at the time.

[Don Kaas]

For reference the markings on a normal run-of-the-Gunworks #3 frame, Grade 2 aka "E" 10 gauge...

[Bill Zachow]

For the record, guys, I know of an "N" that is a lettered 8 gauge.

[Thomas L. Benson Sr.]

This is the gun I sent to my son, pictures attached.

Thomas L Benson Sr.

[Dave Noreen]

My 12-gauge 2-frame Damascus barrel gun that is marked with a 2 above the serial number and an E below is serial number 56213. It is lettered as a Dam 2 PG hammerless by Mark. What doesn't letter is the number 2 set of barrels that ate 32-inch Vulcan Steel 20-gauge barrels. My gun was at The Vintage Cup in 2005 and 2008 when I drove, but I'm flying in this year, so it won't be coming.

http://img.photobucket.com/albums/v316/Ansleyone/Parker/Big20045x7.jpg

[Thomas L. Benson Sr.]

Thanks Dave for your info. I hope to become better educated about my parkers. I'm learning alot. I guess i better send for a letter on this gun. I have received 2 letters so far and only have 5 to go, Thomas L. Benson Sr.