PDA

View Full Version : Newbie I think I broke it


Mark Mays
04-21-2011, 11:18 PM
:banghead:on my grade PH I removed the stock today because it had a good bit of play in it. When I finished cleaning and putting everything back together I see my one of my firing pins sitting on my bench and the other is gone(yes I got on my hands and Knees for 30 minutes looking with no luck) First is how hard is it to get a firing pin and second the other one does not stay in what does it attach to to keep it in?
Any help would be great
Thanks
Mark
Alright additional info the pinece I have extra is a pin with a spring on it if that helps It appears to be a fireing pin but looking at it again the pins are intact

Robin Lewis
04-21-2011, 11:30 PM
Have you run a magnet over the floor to see if you can find the lost pin? You may get lucky?

Mark Mays
04-21-2011, 11:33 PM
http://parkerguns.org/forums/picture.php?albumid=234&pictureid=2369
Here is the pin I found it's not a firing pin both are intact I put a snap cap in and fired both barrells

scott kittredge
04-22-2011, 07:09 AM
hi, that might part 24 on the parker parts list,? scott

Mark Mays
04-22-2011, 09:31 AM
Thats exactly what it is Thanks a bunch

Mark Mays
04-22-2011, 03:42 PM
Alright I have another question regarding the part #24 where does it go? Any one have any photos?

scott kittredge
04-22-2011, 03:59 PM
WELL IF IT IS 24 IT BELONGS TO THE BARREL COCKING HOOK ,IF IT IS PART 20 TRIP PIN WITH A SRRING THAN IT GOES UNDER THE COCKING SLIDE. THE PIC DOES NOT LOOK LIKE 20 BUT 24 IS A BARREL PART. KEEP US POSTED, SCOTT

Mark Mays
04-22-2011, 04:22 PM
Scott Thanks bunch it was the #20 trip sring pin It is now in it's correct place.