PDA

View Full Version : new guy


William Hemmings
02-17-2011, 07:38 PM
I just joined so please bare with me, posted under hammer guns for the first time, probably should have posted here. So if nayone can help with a hammer gun any suggestions wold be welcome. Once again thanks !

Dean Romig
02-17-2011, 10:04 PM
Hey William - Welcome! It's always good to see new Members and first posts.

William Hemmings
02-18-2011, 02:08 AM
looking for info on parker sxs in the albums area posted under my name I think barrell was cut but my friend is sure gun was ordered T 23 1/2 INCHES. i THINK THIS A "G" GRADE. Gun is very tight almost no finish just patina no rust.

Dean Romig
02-18-2011, 06:50 AM
We can't tell you much about your Parker withoun a serial number. It appears to be a grade 2 and seems to be in nice condition.

William Hemmings
02-19-2011, 02:29 AM
S/N is 338xx, if this any help there are 2 birds flying on one side of the recv and 2 grounded birds on the obverse along with scroll work behind the hammers. also bottom of recv and trigger guard. As I said my main concern is that the barrells have been shortened by someone and are not original length.

Robert Rambler
02-19-2011, 08:11 AM
William, Only 33800 and 33801 are listed in the serialization book,a 10ga 32in and a 12ga 30in, unless your gun is one of those it's not listed. Show us a nice clear,closeup picture of the muzzles and we might be able to determine if they were cut from that.