PDA

View Full Version : Single Barrel Trap Cocking Hook


Pat Dugan
04-15-2015, 04:45 AM
When cleaning my SBT after shooting
3 rounds of trap, I noticed that about
40% of the right side of the hook had cleved
off. The gun still cocks but I would imagine
it will be putting twice the strain on the other side and it would fail. Where would I get another. I know the DelGrego firm does
the work but won't just sell the parts
Thanks in advance

PAT

Bill Murphy
04-15-2015, 02:43 PM
You got me on that "cleved" business. Is is chipped or broken or something else?

Pat Dugan
04-15-2015, 03:07 PM
Yes on right side of the hook it's chipped..
I will post picture so all can see better the problem.

Thanks

Pat Dugan
04-16-2015, 03:18 PM
Picture of broken cocking hook

Jeff Kuss
04-16-2015, 06:28 PM
I would think that it could be welded back to size and then filed to fit.

Pat Dugan
04-16-2015, 07:34 PM
I am sending to gunsmith in East Ellijay
to see what he can do..if not repairable then I will know size and be on the hunt for another

Brian Dudley
04-21-2015, 07:41 PM
Yes, the hook would likely continue to operate just fine for a time the way it is.

But it should be replaced as it is damaged.

If you need a replacement, contact me, I have several of them. They are the same as the ones used in the doubles and are the same within most all frame sizes.

Pat Dugan
04-21-2015, 08:11 PM
Thanks so much

PAT