PARKER HAMMER DISASSEMBLY INSTUCTIONS

[SID AUDIFFRED]

I'M NEW TO PARKER GUNS. I WANT TO REBUILD/REPAIR MY PARKER HAMMER DOUBLEBARREL, 271XX. HAVING TROUBLE WITH DISASSEMBLY, NO GUIDE/PICTURES. HAVING PROBLEM WITH SCREW, NOT SURE WHAT IT'S CALLED: TO REMOVE BOTTOM STOCK MOUNT TO WATER TABLE. SEEMS LIKE A PIN HOLDS THE SCREW IN PLACE. PIN TIGHT/JAMED. HARD PIN, TRIED TO DRILL, BRAKE DRILL BITS. "PLEASE' ANY HELP WOULD BE APPRECIATED? ALSO, SOURCE FOR PARTS: HAMMER, SCREWS, PINS. ???

THNAKS IN AVANCE, SID AUDIFFRED

[Harry Collins]

Sid,

Take some pictures. What I visualize scares me. The pctures will help us walk you through this.

Harry

[Francis Morin]

Sid- slow and steady here. Robin Lewis printed out some good basic directions for dis-assembly of the stock and removal of the floor plate of Parkers- words of wisdom from Robin. Patience, good lighting, a well padded vise and work bench and proper screw drivers and drift punches are needed.

First- what was malfunctioning with your Parker-let's start there, and if you can add pictures- When I read about drilling out pins, etc- Whoa Nellie--

:rolleyes: